A – Cannula housing:
a plastic housing with a soft cannula or steel needle that is attached to the skin by an adhesive tape
B – Soft cannula or steel needle:
a small soft cannula or steel needle that is inserted into the subcutaneous skin layer and that allows the insulin to flow into the body
C – Tubing:
a plastic tube that allows insulin to flow from the insulin pump to the body
D – Site connector:
a connector that clicks into the cannula housing and connects the plastic tubing to the infusion site. It allows for temporary disconnection of the pump.**
E – Pump connector:
a connecting lock that connects the plastic tubing to the insulin pump
inset™
- Insertion via integrated insertion device
- 90° insertion angle
- Soft cannula
- Disconnect at insertion site
- Available with 6 and 9 mm cannula length
- Available with 12, 60, 80 and 110 cm (5, 23, 32 and 43 inch) tubing length
Supplied to our partners under the brand names*:
- Tandem: AutoSoft™ XC
- Beta Bionics: inset™
*To ensure compatibility between infusion set and insulin pump, the listed infusion sets need to be used together with the intended pump supplied by the pump manufacturer.
inset™ II
- Insertion via integrated insertion device
- 90° insertion angle
- Soft cannula
- Disconnect at insertion site
- Available with 6 and 9 mm cannula length
- Available with 60 and 110 cm (23 and 43 inch) tubing length
Supplied to our partners under the brand names*:
- Medtronic: MiniMed™ Mio™
- Tandem: AutoSoft™ 90
- Ypsomed: YpsoPump® Inset
- SOOIL: Dana inset™ II
*To ensure compatibility between infusion set and insulin pump, the listed infusion sets need to be used together with the intended pump supplied by the pump manufacturer.
inset™ 30
- Insertion via integrated insertion device
- 30° insertion angle
- Soft cannula
- Disconnect at insertion site
- Available with 13 mm cannula length
- Available with 60 and 110 cm (23 and 43 inch) tubing length
Supplied to our partners under the brand names*:
- Medtronic: MiniMed™ Mio™ 30
- Tandem: AutoSoft™ 30
*To ensure compatibility between infusion set and insulin pump, the listed infusion sets need to be used together with the intended pump supplied by the pump manufacturer.
inset™ guard
- Insertion via integrated insertion device
- 90° insertion angle
- Soft cannula
- Disconnect at insertion site
- Available with 6 and 9 mm cannula length
- Available with 46, 60, 80 and 110 cm (18, 23, 32 and 43 inch) tubing length
Supplied to our partners under the brand names*:
- Medtronic: MiniMed™ Mio™ Advance
*To ensure compatibility between infusion set and insulin pump, the listed infusion sets need to be used together with the intended pump supplied by the pump manufacturer.
contact™ detach
- Manual insertion
- 90° insertion angle
- Stainless steel cannula
- Disconnect at separate site
- Available with 6 and 8 mm cannula length
- Available with 60 and 80 cm (23 and 32 inch) tubing length
Supplied to our partners under the brand names*:
- Medtronic: MiniMed™ Sure T™
- Tandem: TruSteel™
- Beta Bionics: contact™ detach
*To ensure compatibility between infusion set and insulin pump, the listed infusion sets need to be used together with the intended pump supplied by the pump manufacturer.
comfort™/comfort™ short
- Manual insertion
- 20-45° variable angle insertion
- Soft cannula
- Disconnect at insertion site
- Available with 13 and 17 mm cannula length
- Available with 60, 80 and 110 cm (23, 32, and 43 inch) tubing length
Supplied to our partners under the brand names*:
- Medtronic: MiniMed™ Silhouette™
- Tandem: VariSoft™
*To ensure compatibility between infusion set and insulin pump, the listed infusion sets need to be used together with the intended pump supplied by the pump manufacturer.
User guides
Learn more about how to use our diabetes infusion sets with our step-by-step user guides.
Trusted partnerships
Learn more about our partners and the products we manufacture for them.
Instructions for use
View and download our instructions for use for our diabetes product range.